Many people think that the experience of artificial grass depends on the quality of the lawn, but this is not the case. The quality of artificial turf is closely related to the later viewing and experience, but whether the turf is laid reasonably is also very important. The impacts of unreasonable laying methods shared by lawn looms are as follows:

1. the site for laying artificial turf needs to meet certain requirements for flatness and compactness. If the requirements are not met, the laying effect of artificial turf will be affected;

2. the lawn joint surface shall be paved with special lap cloth and fixed with steel nails. The steel nail head shall not be raised, otherwise the lap cloth will not be firmly contacted with the lawn and the adhesion will be weak;

3. special glue for artificial grass shall be used for lawn laying, otherwise the lawn will crack and fall off in a short time, especially in the rainy southern region. More importantly, the environmental protection of glue directly affects the physical and mental health of you and your family;

4. the glue shall be thick and uniform, and shall not be applied repeatedly, otherwise bubbles will appear, the adhesion is weak, or even fall off;

5. the bottom surface of bonded turf and lap cloth shall be cleaned, and the surface shall be dry without water. The adhesive shall not be exposed for too long. The construction temperature is better than 5 ℃, which is not suitable for construction in rainy and moldy days. Otherwise, the bonding time will be too long, the bonding strength will be unqualified, and even non bonding will occur.